7 Ways to Fix DirecTV Wired Connection Lost

There are two types of connection medium. They are wireless and wired. In addition, the wire medium requires cables to connect the device whereas wireless connects via radio. You can connect the DirecTV receiver using both mediums. However, DirecTV wired connection lost means Genie Mini can’t connect to its server.

There could be several reasons for causing the wired connect lost issue. For instance, the wire could be plugged insecurely. Likewise, we have listed many reasons that are responsible for causing this issue.

Today we’ll be discussing DirecTV wired connection lost problem. In addition, there are some working instructions that will prevent this issue from persisting on your DirecTV receiver.

Why DirecTV Wired Connection Lost

If you have used wire on the DirecTV receiver, probably you have heard about this issue. In addition, this issue occurs when the Genie mini’s cable is loosened. Moreover, this issue is caused due to wire’s fault. If you think your wire is faulty, make sure to replace it.

Read DirecTV No Internet Connection Fixed

Similarly, there are many core reasons that could be causing this issue. However, we have picked some popular reasons that could be behind this error. Some of them are:

1. Loose Cable: The connection of the cable is important if there is wired connection. A little loose cable could persists the issue. Make sure all the cables are connected securely.
2. Recevier Box Issue: Most of the time receiver box has issues. As a result, Genie Mini is unable to connect with its server.
3. Damaged Cable: When there is fault on the cable. It might be the cable is not transfering the signals to the receiver.
4. No Signal: The satellite might be offline at the momment. It will take few hours to get satellite online.

Troubleshooting Ways for DirecTV Wired Connection Lost

Now, we know what causes the DirecTV wired connection lost issue. There are a few reasons that causes could cause this issue. However, there are many distinct ways to fix DirecTV wired connection lost issue.

These instructions are easy to apply on different and every receiver of DirecTV. For instance, we have provided the instructions based on the Genie series. All the instructions are some of each and every model of the DirecTV receiver.

The underlying instructions support Genie, Genie Mini, DirecTV HD-DVDR, and later receiver models. Don’t get confused if your receiver model is distinct as mentioned here.

Method 1: Make sure Cable are Connected Properly

To make sure all the wires and cables are connected securely on the receiver. On the backside of the receiver box, there are cables. Remove each and every cable including HDMI and coaxial cable. Now, clean the port carefully.

Afterward, insert the cable into the receiver box. Ensure the cable is connected properly. However, if the cables seem loose, then eject them and reinsert them properly.

Method 2: Check Cables

The cables that are in use must be good in condition. In addition, the condition of the cable is identified from its physical state or you have to test with the multi-meter tool. The cable must be working in condition and do not have any kind of physical damage.

You can easily check the condition of the cable by looking at it. If there are marks of damage on the cable. This means the cable is damaged. However, the most effective way of checking the cable is via a multi-meter.

Method 3: Replace Damaged Cable

If the cable is damaged or broken, make sure to replace it. For instance, using good condition cable helps to reduce the chance of getting issues on the receiver. It also helps to maintain the receiver in good condition.

Take out both ends of the cable from the smart TV and receiver. Now, insert a new cable into the receiver and smart TV. Make sure the cable has been connected properly. After that, check if DirecTV wired connection lost issue exists.

Method 4: Reset Receiver, DVDR

Reset returns everything to factory default settings. However, there are distinct instructions to reset receiver and DVDR respectively. Apply the instructions to reset the DirecTV receiver Genie series:

1. Locate the Red button inside the Access card door.
2. Press the Red button.
3. After that, the device will be restart soon.
4. Once the process is completed, check if the issue persists.

If you don’t have a Genie box, well here are the instructions for DirecTV HD DVDR and later models. Press the Red button on the front side of the DVDR. Now, the DirecTV receiver and DVDR have been reset successfully.

Read more: DirecTV Genie Not Working in One Room Fixed

Method 6: Switch to Wireless Connection

The alternative to the wired connection is to switch on a wireless connection. However, the older device could not support the wireless connection. The Genie HD DVDR can also connect to the internet.

If you have an internet connection, you can connect your receiver with the internet in the case of a wired connection loss.

Method 7: Contact ATT

You can contact ATT in case you are unable to solve the issue. In addition, they will search for the reasons why this issue occurs in your case. You can contact ATT they will assist you regarding DirecTV wired connection lost issue.

Final Thoughts

A wired connection is the best alternative to a wireless connection. However, you can solve DirecTV wired connection lost issue using these instructions. If you are unable to get a successful conclusion. Take the help of a technician.

If you feel any doubts about DirecTV make sure to leave us a comment. Similarly, here is some doubtful thought that I faced while solving this issue.

Also Read: DirecTV Delay Changing Channels Fixed

FAQ About DirecTV Lost Wired Connection