DirecTV cannot Detect SWM is an issue that occurs when the SWM is damaged or a receiver is undergoing a glitch. It also happens when the coaxial cables are damaged. As a result, you can’t watch TV.
DirecTV is a satellite television service provider which uses satellites to transmit signals. It is not uncommon that DirecTV loses signals or cannot detect swm. However, SWM(Single-wire multi-switch) is a splitter or hardware that has one coaxial cable as input and can split signals into two cables.
Although this issue seems very complicated, you can easily solve it within just a few steps. Here we are going to fix DirecTV that can’t detect swm. Therefore, read this article in order to get an answer to your doubts.
Why DirecTV Cannot Detect SWM
When you split the DirecTV signal, the SWM could be broken. There could be the coaxial cables broken or damaged. Likewise, there are various reasons behind DirecTV cannot Detect SWM. For instance, here are some potential things that could be the reasons behind this issue.
- Damaged Coaxial Cable.
- Generic Bug on receiver box.
- Power inserter issue.
- SWM limit exceed.
- Cables not connected on correct ports, etc.
How to Fix DirecTV Cannot Detect SWM
In order for DirecTV to recognize SWM, we need to replace a few things. In addition, follow the given instructions to fix this issue and DirecTV will not be able to detect the SWM.
Read: DirecTV Mini Genie Not Connecting to Server Fixed
Method 1: Install Correct SWM
Most people do not have any idea about SWM’s specifications. As the result, they ended up getting detection errors on DirecTV. An SWM is an accessory that splits the satellite signals into two parts. Therefore, you can use multiple Tuners and DVDRs for multiple TVs.
To fix DirecTV cannot detect SWM issues, make sure you have installed the correct SWM model. However, there are many SWM models. It could be your receiver does not support SWM that you have installed.
Method 2: Check SWM Limit Numbers
An SWN can only connect only have few connections. In addition, it has limitations on how many DVDRs and Tunners it can connect. Most usual configurations support 5 DVDRs and 8 receiver/tuners on an SWM. For instance, DirecTV is unable to detect SWM due to its limit has exceeded.
It totally depends upon how many connections you currently have on SWM and how much it can handle. If you have recently added a connection to SWM remove it and check if the error still exists. To stay out of being unable to detect issues, make sure to keep connections that are supported.
Method 3: Restart DirecTV Receiver
Sometimes the SWM has supported a number of connections but the issue still persists. However, it could be caused when the receiver has temporary bugs or glitches. To troubleshoot the temporary issue on the receiver, you should restart it.
Each satellite receiver must obtain its own “SWM assignment,” which might cause problems if multiple receivers request it at the same time. Make sure to restart the receivers one after another because if you restart all receivers at once. It could cause service loss on all the TVs. Ensure to avoid conflict and check if SWN is detected.
Method 4: Replace SWM
If DirecTV is still unable to detect SWM, replace the SWM that is currently detected. For instance, the SWM might be damaged or have some issues. As a result, it is unable to detect by DirecTV. You can easily replace it. To do that, contact AT&T and you will get compatible SWM for your streaming.
Method 5: Check Coaxial Cable
The coaxial cable which is used to connect the satellite dish and SWM could be damaged or broken. As a result, it is showing not detected status on the receiver. Check the sign for any damaged or broken in the cable. If there is a broken point, replace the cable.
Read more: DirecTV Playback Failed
Method 6: Check Power on SWM
When SWM has no power supply. DirecTV cannot detect SWM. First, unplug the power cord from the wall outlet after that unplug in SWM. Now, replug the cables and check if it has power. If the SWM is already powered on, power cycling could help to terminate temporary errors.
To power cycle, unplug the power cable from the wall outlet and wait for 30 seconds. After that, plug it into an outlet and check if it gets detected or not.
Method 7: Check Ports
When the cables are not connected to correct ports or they are not connected properly. Therefore, you are getting SWM not detected message on your TV screen. In order to fix this issue, remove all the cables from ports and insert it securely into the correct ports. After that, check if the error still exists.
Final Thoughts
DirecTV cannot detect SWM is an issue that causes when SWM is not configured properly. Moreover, it also happens when SWM does not match with the streaming experience. However, there are many ways to troubleshoot this issue. If you are unable to fix this issue, contacting AT&T will help you to fix the issue.
You have to understand SWM and do not hit its connection limit. The wiring and cabling also maters to configure SWM. We hope you have fixed this issue using the steps mentioned earlier.
Also Read: DirecTV Remote Volume Not Working Fixed
FAQ about DirecTV Not Detect SWM
1. Do I need an SWM for DIRECTV?
Ans: Yes, it is mandatory to have SWM on DirecTV. In addition, the SWM is required on Genie DVDR set-up.
2. What is the SWM for DIRECTV?
Ans: SWM stands for Single Wire Multiswitch. It is an electric component that splits signal wire from the satellite into distinct receivers and DVDRs for more TVs.
3. How do I fix DIRECTV 775?
Ans: To fix DirecTV 775, make sure the SWM inserter is connected properly to the power supply.
4. What is a SWiM power inserter?
Ans: SWiM power inserter supplies the electricity to all of the electric components inside the Dish.