DirecTV home network interference is a problem with the connection between the satellite dish and receiver box or between smart TV and receiver. In addition, you can easily fix this problem after connecting the coaxial cable properly.
Similarly, DirecTV home network interference occurs due to many reasons. In addition, there could be a satellite dish blocked by some object. Moreover, network interference occurs when the receiver can’t receive the signal from the DirecTV satellite.
If you are encountering the network interference issue on your DirecTV. Here are some solutions that are going to fix the problem easily. In addition, the network will be stable on DirecTV and there won’t be any problems related to the network.
DirecTV Home Network Interference
DirecTV is a satellite dish streaming services which has recently adapted on-demand feature to stream its content over internet on any device. However, DirecTV home network interference problem prevents streaming the DirecTV contents on the smart TV as well as on another device.
Read: Red Light on DirecTV Remote Fixed
When users encounter this problem. They might think there is an issue with the DirecTV receiver. However, the problem is with the cable that is used to connect the receiver and satellite. If you are using DirecTV over the internet, there might be an internet connectivity problem.
Similarly, packet loss on the DirecTV could be another reason behind the network interference problem. These are the physical reasons. However, the network might be interrupt due to corrupted network configuration on the receiver settings.
How to Fix DirecTV Home Network Interference
The DirecTV home network interference issue can easily be fixed after applying the following instructions. Make sure the receiver is working and connected properly with the smart TV.
Method 1: Check the Packet Loss
The main reasons behind the DirecTV home network interference is packet loss. In addition, you might be unable to use the television when the packet loss issue persist. The packet loss issue persists from the backend of the receiver.
The initial step is to confirm the packet loss issue. To do that, access the home of DirecTV and then press the “Arrow” key and guide button on on the remote at once. Make sure to repeat this process few times as the time must be accurate.
Now, the configurations menu will appear on the screen. Select the “COAX” tab on located on the left side of the screen. The detailed list will appear on the screen with the DECA nodes used on the device. Now, toggle with the different nodes available on that list. Check and compare how much loss is getting on different nodes.
If the loss is above the 45%, that’s why you are encountering the DirecTV home network interference problem is available. However, make sure to use the node where the loss is below 45%. This will prevent the problem on your DirecTV.
Method 2: Check Cables
The network interference issue might be caused due to the wires and cable problem on the DirecTV. For instance, the cable might be broken or the wired connection is not connected securely. The wire between the smart TV and the receiver box must be secured.
Read: DirecTV This Location is Not Authorized Fixed
To secure the connection on the DirecTV, unplug the cables and then plug it inside the adapter. Make sure to plug the cable securely. After that, check if the isue still persists.
Similarly, if the cable is connected properly without any lose node. The cable might be inserted into the incorrect port. However, make sure to insert all the cables into the correct smart TV port. After that, check if the issue persist on the DirecTV.
Method 3: Update Firmware
Sometimes the network gets interrupted when the receiver is still running on the out dated firmware. However, you can easily fix this after updating the firmware to the latest version. The old firmware might have bugs that might glitch some features on the receiver.
The simple solution is to update the firmware of the receiver. In addition, there are a lot of benefits of updating the firmware to the latest version. The newest features come with the newest firmware. The bugs and glitches are fixed on the newest firmware.
To update the firmware, go to settings and general. Now, select “Search For Update” to initiate the server updating process. It will take a few minutes to update the firmware. Once the update is complete, check if the network interference issue persists.
Final Thoughts
DirecTV home network interference is a problem that causes when the receiver does not receive a proper input signal from the satellite dish. However, you can easily fix this problem after updating the firmware and connecting the cables properly.
If the packet is loss is causing the problem. Make sure to choose the node where the packet loss is low. However, if you have any doubts about the DirecTV home network interference. Feel free to leave us a comment.
Read: Fix DirecTV White Screen
FAQ about DirecTV Home Network Interference
1. Why is my DirecTV cutting in and out?
Ans: DirecTV cutting in and out occurs when the cable is not connected properly. Make sure to insert the cables properly into the correct port.
2. What is Code 620 on DirecTV?
Ans: DirecTV code 620 indicates there is a loss on the video connection. In addition, the video is missing but there is audio. Check the HDMI connection between the receiver and the smart TV.
3. Why does my DirecTV keep Pixelating?
Ans: DirecTV keep pixelating because of low signal. In addition, there might be signal interruption due to storm, raining and clouds, etc.
4. What is code 88 on DIRECTV?
Ans: Error code 88 on DirecTV indicates the receiver needs an internet connection. Make sure to connect the receiver to the WiFi or use ethernet to connect to the internet.