DIRECTV Remote Not Working Fixed

DIRECTV remote not working can be a frustrating experience for any DIRECTV subscriber. There are several potential causes for this issue, and fortunately, many of them can be easily resolved.

Common causes of a non-working DIRECTV remote include dead batteries, a blocked IR sensor, dirty or damaged buttons, conflicting remotes, and software issues. Let’s take a closer look at each of these causes and the steps you can take to resolve them.

In this blog post, we will discuss some common reasons why your DIRECTV remote may not be working and provide some troubleshooting steps to help you get it up and running again.

How to Fix Remote not Working on DirecTV

Replace Batteries

Dead batteries are the most common cause of a non-working remote. If you suspect that this is the issue, you should first check the batteries in your remote and replace them if necessary.

Read: DirecTV Remote Volume Not Working Fixed

Make sure to use new and high-quality batteries to ensure that your remote will work properly. If you have replaced the batteries and your remote is still not working, then the issue may be caused by something else.

Remove Signal Blocking Objects

Another common cause of a non-working remote is a blocked IR sensor. The IR sensor is the device on your DIRECTV receiver that detects signals from your remote.

If this sensor is blocked by something, it will prevent the remote from communicating with the receiver. To fix this, simply move any objects that may be blocking the sensor and try again.

Clean Remote

Dirt and debris can also build up in the buttons of your remote over time, causing them to malfunction. Clean the buttons with a soft cloth and make sure that there is no physical damage to the remote.

However, if the remote is dirty, it can also cause the buttons to stick, which can prevent the remote from working properly.

Read: How to Program DirecTV remote RC73

Turn Off Another Remote

If you have multiple remotes in your home, they may be conflicting with each other and prevent your DIRECTV remote from working properly. Try turning off or removing the batteries from any other remotes in the room and see if that resolves the issue.

Reset Remote

It’s possible that there may be an issue with the software on your receiver. In addition, resetting the remote can help to clear any temporary issues that may be causing it to malfunction, such as incorrect settings or software glitches.

1. Locate the small red button on the back of the remote. This button is usually located near the battery compartment.
2. Press and hold the red button while also pressing the “Power” button on the remote.
3. Keep both buttons pressed for at least 15 seconds.
4. Release both buttons and wait for the remote to reset.
5. This may take a few seconds.
6. Try using the remote again to see if it is now working properly.

Final Thoughts

In summary, if your DIRECTV remote is not working, there are several potential causes that you can troubleshoot. Some of the most common issues include dead batteries, a blocked IR sensor, dirty or damaged buttons, conflicting remotes, and software issues.

By following these troubleshooting steps, you should be able to resolve the issue and get your DIRECTV remote working properly again. If you continue to experience problems, be sure to contact DIRECTV customer support for further assistance. With their expertise, they will be able to help you to fix the problem and enjoy your programming again.

Read: How to Record on DIRECTV

FAQs