DirecTV Remote Volume Not Working Fixed

DirecTV remote volume not working is a common complaint if you have DIRECTV service. Some of the tips for resolving this issue are to change batteries, make sure your remote is not blocked from your TV, and never point the remote at the TV.

The TV remote is one of the most used types of remotes. It’s a common problem when the remote doesn’t work and you’re unable to change channels or adjust the volume. If your DirecTV remote volume not working, it could be any number of issues. Read on to find out what you can do to fix it quickly!

Why DirecTV Remote Volume Not Working

There are a few things that could be preventing the remote from working on DirecTV. In addition, you have to prevent such a thing in order to fix DirecTV remote volume not working issue.

1. Dead batteries
2. Signal Blocked
3. Remote button sucked
4. Sensor blocked
5. Remote not programed properly, etc.

Also check: DirecTV No Internet Connection Fixed

Troubleshoot DirecTV Remote Volume Not Working

The remote volume of your DirecTV is not working? There may be several things wrong, but don’t worry. The following instructions will help you resolve the issue in a few steps.

Method 1: Check the batteries

Make sure the batteries are properly inserted. If the remote doesn’t have a battery door, then slide down the cover covering the battery and check if it’s incorrectly. Make sure you haven’t pushed it to the side, because that may cause the problem.

Method 2: Try another remote

If the batteries are properly inserted, try using another remote to see if it works. If it doesn’t work, then you’ll definitely have to replace the remote. Rather remote has not programmed properly.

Method 3: Replace the batteries

If another remote doesn’t work, then you’ll need to replace the batteries with the remote. Therefore, low batteries or dead batteries on the TV remotes do not work properly. Take your remote and slide down the cover of the battery. Take out batteries from the remote.

Afterward, insert the new batteries into the remote. Press and hold any button on the remote to check its life. If the color glows solid green, your battery is fine. Now, try to increase or decrease the volume on your DirecTV.

Method 4: Avoid Obstacles

When there is any physical barrier between the remote and receiver box. DirecTV remote volume not working issue persists. It happens because the physical barrier blocks wireless signals. If there is any obstacle or anything that blocks the signal, remove it.

Method 5: Reset Receiver

Some buttons don’t work properly including the volume button. The unresponsive remote happens when the receiver and remote have issues. However, the easy way to get rid of the DirecTV remote volume not working is either by resetting the remote or receiver.

To reset the receiver, you have to find the small red button that is located inside the access card door. Press and hold the button for 30 seconds. Afterward, the resetting process will begin. In case, your receiver has no red button. You can unplug it in order to reset it.

Read: DirecTV Mini Genie Not Connecting to Server Fixed

Method 6: Reset Remote

If you are unable to get rid of an unresponsive button after resetting the receiver box. Then you should reset the remote instead. Apply the following steps to reset the DirecTV remote:

1. Press and hold “Select” and “Mute” button until the light blinks 3 times.
2. Now, press 9-3-1 button in same sequences.
3. Once the remote blinks 4 times the resetting process has been completed.

Method 7: Pair Remote with Receiver

After resetting the receiver or remote. The remote needs to be paired with the receiver in order to function properly. Similarly, if you are not sure whether the remote is configured with the receiver properly. Then, apply the underlying steps to pair the remote with the receiver.

1. Hold the Enter button on remote for three seconds.
2. Now, the source menu will pop up on the screen.
3. Select the correct receiver input source.
4. Now, press Enter and Mute button while pointing the remote to receiver.
5. When the remote successfully pairs with receiver, you will receive IR/RF setup message.

Method 8: Reprogram Genie Remote

Like pairing the remote after resetting the receiver. You have to reprogram the Genie controller. In addition, there is two way to reprogram the genie controller. For instance, either automatically or manually. This will fix DirecTV remote volume not working issue.

Apply the underlying instructions to program Genie Controller Automatically as it is the easiest and most effective way.

1. Press and hold the “ENTER” and “MUTE” button sequentialy at pointing to receiver.
2. Release buttons after the light on the device glows and blinks green color twice.
3. Now, the Applying IR/RF setup message on the TV screen will appear. This indicates the setup has been ready.
4. Press the “MENU” button on remote.
5. Navigate to Settings & Help.
6. Go to Settings and select Remote-control.
7. Select Program Remote and follow on-screen instructions.

Manual Programming

If the remote does not program automatically, you can manually program it. To do that, follow the given instructions:

1. Point the remote control to receiver and press “SELECT” and “MUTE” button in a sequence.
2. When the green light blinks twice release the buttons.
3. Press 9-6-1 on remote.
4. Now, press on Channel-up button after that Enter button.
5. Confirm it and the follow on screen instructions to set up.

The Bottom Line

If the volume on your DirecTV remote volume not working there is a few potential problems. First, make sure to check if it is a battery problem by replacing the batteries. However, if that doesn’t work, you might need to replace the whole remote. Lastly, you may need to reboot your home network or do a quick reset to your Direct TV receiver.

Basically, it is an issue when the remote does not work properly. When the remote is useless, can’t adjust the volume. If you have any doubt, leave us a comment.

Also read: DirecTV Stuck on 480p Fixed

FAQ About DirecTV Remote Volume Not Working